BLGWV - SUNPROOF PASTEL BASE SOUTHERN VERSION, 1-93

  • MSDS: BLGWV
  • Manufacturer: PPG INDUSTRIES INC
  • Product Name: SUNPROOF PASTEL BASE SOUTHERN VERSION, 1-93
  • National Stock Number: 8010-00N019730
Product Identification

Product ID:SUNPROOF PASTEL BASE SOUTHERN VERSION, 1-93
MSDS Date:07/18/1991
FSC:8010
NIIN:00N019730
MSDS Number: BLGWV

Responsible Party
PPG INDUSTRIES INC
1 PPG PL
PITTSBURGH, PA 15272
US

Emergency Phone: 304-843-1300; 800-441-9695

Info Phone: 412-434-3131

Cage: 47695

Contractor
PPG INDUSTRIES INC
PITTSBURGH, PA 15272 US

Telephone: 1-800-245-2974 (CAL HYPO)

Cage: 47695

Ingredients

AIRBORNE CONTAM AGAINST WHICH RESP IS EFTIVE &

RTECS: 9999999ZZ


LMTS, LEL BELOW STATED LMT & TO REMOVE DECOMP PRODS

RTECS: 9999999ZZ


OR POLYVINYL ALCOHOL GLOVES.

RTECS: 9999999ZZ


TITANIUM DIOXIDE

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: 15-20%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293


ZINC OXIDE

CAS: 1314-13-2

RTECS: ZH4810000

Fraction By Weight: 5-10%

OSHA PEL 15MG/M3 TDUST/5 FUME

ACGIH TLV: 10MG/M3 TDUST; 9293


ALUMINUM SILICATE

CAS: 1335-30-4

Fraction By Weight: 5-10%


SILICONE DIOXIDE; (SILICA, AMORPHOUS-DIATOMACEOUS EARTH)

CAS: 68855-54-9

Fraction By Weight: 5-10%

OSHA PEL 6 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST


SOLVENT NAPHTHA, MEDIUM ALIPHATIC

CAS: 64742-88-7

Fraction By Weight: 20-25%


FILM FORMERS, RESINS & ADDITIVES

Fraction By Weight: 30-35%


SILICA, CRYSTALLINE - QUARTZ

CAS: 14808-60-7

RTECS: VV7330000

Fraction By Weight: 5-10%

OSHA PEL SEE TABLE Z3

ACGIH TLV: 0.1 MG/M3 RDUST;9293


ZINC COMPOUNDS

Fraction By Weight: 5-10%


TUMORS. POTNTL FOR INHAL OF TITANIUM DIOXIDE

RTECS: 9999999ZZ


EXPECTED, THERE IS NO SIGNIFICANT HAZ FOR HUMANS.

RTECS: 9999999ZZ


IARC ASSOC W/INCR RISK OF CANCER IN LAB ANIMALS.

RTECS: 9999999ZZ


LEAD TO DISABLING INJURY KNOWN AS SILICOSIS. EFTS

RTECS: 9999999ZZ


APPLICATN OF PROD IS NOT EXPECTED TO GENERATE

RTECS: 9999999ZZ


FOR HUMANS IS LIMITED.

RTECS: 9999999ZZ

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:ACUTE:INGEST:HARMFUL/FATAL.
TEARING/HDCHS/ NAUS/ DIZZ/LOSS OF COORD INDICATES SOLV LEVELS ARE
TOO HIGH. EYE:CAUSES IRRIT. REDNESS/ITCH/BURNING SENSATION/VISUAL
DISTURB MAY INDICATE EXCESSIVE CNTCT. SK IN:MAY CAUSE MOD IRRIT.
DRYNESS/ITCH/ CRACKING/BURNING/REDNESS/ SWELLING ARE CNDTNS ASSOC
W/EXCESSIVE (EFTS OF OVEREXP)
Explanation of Carcinogenicity:CRYSTALLINE SILICA:IARC GRP 2A.
Effects of Overexposure:HLTH HAZ:CNTCT. INHAL:VAP/SPRAY MIST MAY BE
HARMFUL. VAP IRRIT EYES/NOSE/THROAT. SANDING/GRINDING DUSTS MAY BE
HARMFUL. RPTD EXPOS TO HIGH VAP CONC MAY CAUSE IRRIT OF RESP SYS &
PERMANENT BRAIN/ NERV SYS DMG. INTENT MISUSE BY DELIB
CONC/INHALING CONTENTS CAN BE HARMFUL/ FATAL. CHRONIC:AVOID
LONG-TERM/RPTD CNTCT. (SUPDA

First Aid

First Aid:INGEST:DO NOT INDUCE VOMIT. EYE:FLUSH IMMED W/PLENTY OF H20
FOR @ LST 30 MIN. SKIN:REMOVE PROMPTLY BY WIPING, FOLLOWED BY
WATERLESS HAND CLEANER & SOAP & H20. INHAL:REMOVE TO FRESH AIR.
APPLY ARTF RES P & OTHER SUPPORTIVE MEASURES AS REQD. OTHER:IF
INGEST, ANY TYPE OF OVEREXP/SYMP OF OVEREXP OCCUR DURING/FOLLOWING
USE OF PROD, CNTCT POIS CTL CTR, EMER ROOM/MD IMMED; HAVE MSDS INFO
AVAIL.

Fire Fighting

Flash Point Method:PMCC
Flash Point:110F,43C
Lower Limits:1%
Extinguishing Media:USE NFPA CLASS B EXTING (CO2, DRY CHEM/UNIVERSAL
AQUEOUS FILM FORMING FOAM).
Fire Fighting Procedures:H20 SPRAY MAY BE INEFTIVE. H20 SPRAY MAY BE
USED TO COOL CLSD CNTNRS TO PVNT PRESS BUILD-UP & POSS
AUTOIGNIT/EXPLO WHEN EXPOSED TO EXTREME HEAT. IF (SUPDAT)
Unusual Fire/Explosion Hazard:KEEP CNTNRS TIGHTLY CLSD. ISOLATE FROM
HEAT/ ELEC EQUIP/SPKS/OPEN FLAMES. CLSD CNTNRS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT. DO NOT APPLY ON HOT SURF.(SUPDAT

Accidental Release

Spill Release Procedures:PROVIDE MAX VENT. ONLY PERS EQUIPPED W/ PROPER
RESP & SKIN & EYE PROT SHOULD BE PERMITTED IN AREA. REMOVE ALL
SOURCES OF IGNIT. TAKE UP SPILLED MATL W/SAWDUST, VERMICULITE/OTHER
ABSORB MATL & PLACE IN TO CNTNRS FOR DISPOSAL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:DO NOT STORE ABOVE 120F. STORE LG QTYS
IN BUILDINGS DESIGNED & PROTECTED FOR STORAGE OF NFPA CLASS II
COMBUSTIBLE LIQUIDS.
Other Precautions:IF MATL IS PART OF MULTIPLE COMPONENT COATING SYS,
READ MSDS FOR OTHER COMPONENTS BEFORE BLENDING AS RESULTING MIXT
MAY HAVE HAZ OF ALL ITS PARTS. CNTNRS SHOULD BE GROUNDED WHEN
POURING. AVOID FREE FA LL OF LIQS IN EXCESS OF FEW INCHES.

Exposure Controls

Respiratory Protection:OVEREXP TO VAPS MAY BE PREVENTED BY ENSURING
VENT CONTROLS/VP EXHST/FRESH AIR ENTRY. NIOSH/MSHA APPRVD PAINT
SPRAY/AIR SUPPLIED RESPS MAY ALSO REDUCE EXPOS. READ RESP MFR'S
INSTRUCTIONS & LITERATURE C AREFULLY TO DETERMINE TYPE OF (ING 15)
Ventilation:PROVIDE GEN DILUTION/LOC EXHST VENT IN VOL & PATTERN TO
KEEP CONC OF INGRED LISTED BELOW LOWEST SUGGESTED EXPOS (ING 16)
Protective Gloves:NITRILE RUBBER, NEOPRENE RUBBER,(ING 17)
Eye Protection:CHEM WORK GOGG/FULL LENGTH FCSHLD.
Other Protective Equipment:PROTECTIVE CLOTHING, INCLUDING IMPERMEABLE
APRON. EMERGENCY EYE WASH & DELUGE SHOWER .
Work Hygienic Practices:CLEAN OR DISCARD CONTAMINATED CLOTHING & SHOES.
Supplemental Safety and Health
FIRE FIGHT PROC:H20 IS USED, FOG NOZZ ARE PREF. WEAR NIOSH/MSHA APPRVD
SCBA & FULL PROT EQUIP . EXPLO HAZ:TOX GASES MAY FORM WHEN PRODUCT
CONTACTED BY FLAME/HOT SURFS. HAZ DECOMP PROD: INCL:CO & ZINC
OXIDE. EFTS OF OVEREXP:ANIMALS INHAL MASSIVE QTYS OF TITANIUM
DIOXIDE DUST IN LONG-TERM STUDY DEVEL LUNG (ING 9)

Chemical Properties

HCC:F4
Boiling Pt:B.P. Text:277F,136C
Vapor Pres:2.1
Vapor Density:>AIR
Spec Gravity:1.32
Evaporation Rate & Reference:18 (BUTYL ACETATE=100)
Solubility in Water:0.0%
Appearance and Odor:VISCOUS LIQUID W/ODOR CHARACTERISTIC OF SOLVENTS.
Percent Volatiles by Volume:36.3

Stability

Stability Indicator/Materials to Avoid:YES
STRONG ALKALIES, STRONG MINERAL ACIDS OR STRONG OXIDIZING AGENTS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:MAY PRDCE HAZ DECOMP PRODS WHEN
HEATED. WELDING/BRAZING/FLAME-CUTTING ON SURFS COATED W/PROD MAY
PRDCE FUMES (SUPDAT)

Disposal

Waste Disposal Methods:WASTE MATERIAL MUST BE DISPOSED OF I/A/W
FEDERAL, STATE, PROVINCIAL & LOCAL ENVIRONMENTAL CONTROL
REGULATIONS. EMPTY CONTAINERS SHOULD BE RECYCLED OR DISPOSED OF
THROUGH APPROVED WASTE MANAGEMENT FACI LITY.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.